China competitive price EPDM high elastic rubber roof membrane for
The product uses the technology of internationally advanced
level-cold feed extruder continuous vulcanization, chooses imported
epdm and accessories with high quality. The production is of well
quality according to the national standards.
This product has the high elasticity and high elongation and high
tear strength and excellent low temperature performance and water
resistance, ozone resistance, aging resistance performance.
|Tensile strength (N/cm)||normal temperature≥||7.5|
|Elongation at break (%)||normal temperature≥||450|
|waterproofness, 30min no permeation||0.3Mpa|
|Low temperature bending °C≤||-40|
|Heating expansion amount,mm||extension<||2|
Note for Use
Don't spread on the surface of the frozen base for the coil;
Don't construct on the pollution and moisture content on the high
side at the grass-roots level;
Adhesive coil packaging and isolation of paper can only removed in
front of the shop post and posting ;
When sealant isn't used up, it need to tighten the container seal
Why choose us?
1,Honest supplier to the worldwide buyers
2,Factory, direct supplier, competitive price
3,Know how to control the costing with 30 years experience
4,Warm and friendly service and guide
5,China National Standard GB/18242-2008
6,3 shifts workers for 24hrs production, high capacity
7,Small and big orders are welcome from the worldwide
8, 24 hours service for you
We are the most professional manufacture of waterproofing membrane,especiallyfor themodified bitumen and self-adhesivewaterproofing membraneand the polyurethane and polymer cement waterproofing coating.
Our factory has 30 years long history with 5 big production lines,and the capacity can reach: waterproof membrane200,000square metersper day,waterproof coating 70 ton/day,it's totally can meet customers requirements about the quantity and
Wealso havea well trained sales team.Our professional has won many oversea customers.
Hope we build good cooperation.
Look forward to yourinquiry.
1. Different type and specification should be stacked separately;
2. Avoid sun-scorched and rain-drenched, Be ventilation;
3. The storage temperature should below 50°C;
4. It have to be one storey when keep in storage stand on end, and
shouldn't be more than two stores when transporting;
5. Avoid tilting or lateral drift, Covered with tarpaulin if need;
6. Base on the normal storage and transportation, the storage
period is one year from the date of production.
1. Provide high quality and competitive price.
2. Professional sales to answer all your questions about products.
3. Strict quality control of production.
4. Timely communication during the production process.
5. Provide technical support after sales if you needed.
Thanks for your visit, any question, pls contact me freely!